Petersen 146-90150- 1.39″-1.51″ Dia Medium Pressure Mechanical Pipe Plug, 1/4″ Bypass

Original price was: $220.39.Current price is: $55.10.

146-90150-_A

Bolt plug sizes smaller than .375″ come standard with Neoprene seals, others are Nitrile seals for hydrocarbon resistance. Plated carbon steel. Single Shaft. Tubing plugs may be customized for most size, pressure, chemical, and pressure requirements.

Simple, reliable testing of a pipeline.

Typical Applications: Designed for simple, reliable testing of pipe and tubing to 300 psig (20.7 bar), without the tube wall damage associated with other test plugs. That’s because Bolt Type Medium Pressure Plugs feature a nitrile seal – the only part of the plug that comes in contact with the tube I.D. To use, simply install into the open end of the pipe or tube and tighten the large compression nut to expand the seal element. Then begin testing.

Note, caps are not included with plugs

By-Pass 1/4″ MNPT
By-Pass Flow Through Cap Type Not Included
Country of Origin USA
Dia. Max 1.51″ (38mm)
Dia. Min 1.39″ (35mm)
Lngth, Overall 8″ (203mm)
Lngth, Seal 2.5″ (64mm)
Material, Body Carbon Steel, Plated
Material, Hardware Steel, Plated
Material, Seal Nitrile
Nominal Pipe 1-1/2″ Sch 80
Pipeline Max PSI 200 psi (13.78 bar)
Pressure Pipeline Max Head 462 ft (140.81 m)
Sage Subcategory Number W1469
Seal Expansion System Hex Nut, 1/2″
Seal Expansion Torque Ft/Lb 30 FT-LB
Shipping Wt. 1 Lb (0.45 Kg)
Style Internal to Pipe Plug
Temperature Max. Service F 200 F (93.33 C)

Reviews

There are no reviews yet.

Be the first to review “Petersen 146-90150- 1.39″-1.51″ Dia Medium Pressure Mechanical Pipe Plug, 1/4″ Bypass”

Your email address will not be published. Required fields are marked *

Product added!
The product is already in the wishlist!
Removed from Wishlist

Shopping cart

close